Makita GMH01M1 40V max XGT Brushless Lithium-Ion 15 lbs. Cordless SDS‑MAX AVT Demolition Hammer Kit (4 Ah)
Makita Model: GMH01M1
See Price in Cart
Why is the price hidden?
We want to pass on our savings to our customers, so we've lowered the price of this item. However, since our price is now below the manufacturer's suggested retail price, we are restricted by the manufacturer from showing the price right away.Free Makita 40V max XGT 4.0Ah Battery when you order this item, a $199 value See Details
See More
See Less
Free shipping on all orders over $149
Update Delivery Times
Enter your ZIP code to estimate delivery times.
-
Last 3 In Stock
CA Residents
Prop 65 Warning
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.Cancer
Product Features & specs :
Makita GMH01M1 40V max XGT Brushless Lithium-Ion 15 lbs. Cordless SDS‑MAX AVT Demolition Hammer Kit (4 Ah)
Details
The 40V max XGT Brushless Cordless 15 lb. Demolition Hammer Kit (GMH01M1) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The demolition hammer delivers up to 20 percent faster breaking than an equivalent corded hammer (HM0871C). It accepts SDS-MAX bits. Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT) is engineered for improved dust and water resistance. Auto-Start Wireless System (AWS) uses Bluetooth technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site. Constant speed control that automatically applies additional power to the motor to maintain speed under load to complete challenging jobs and a variable speed control dial enables users to match speed to the application. Additional performance features include an electric brake, variable speed dial, built-in L.E.D. light, a soft-start to suppress start-up reaction, and Soft No-load function that automatically reduces the speed of the motor when idling. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Features:
-
Outpower: Makita brushless motor along with 40V max XGT battery combine to deliver up to 20 percent faster breaking efficiency than corded equivalent model
-
Outsmart: Constant speed control automatically applies additional power under load for optimum performance
-
Outlast: Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
-
Anti-Vibration Technology (AVT) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
-
Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)
-
Dust extraction capability with optional Makita Dust Attachment Kit
-
Soft start suppresses start-up reaction for improved accuracy
-
"Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
-
Built-in L.E.D
-
light with an independent on/off switch illuminates the work area
-
Variable speed dial and trigger enables operator to match the speed to the application
-
Large multi-finger power trigger with lock-on power for increased comfort during extended use
-
Multiple angle settings allow the steel/bit to be set at different positions for operating convenience
-
Side handle swivels 360 degrees for increased maneuverability
-
The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
-
The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
-
XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
-
XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
-
The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
-
The XGT Rapid Charger's digital display indicates battery charge level (-80 percent, +80 percent, 100 percent)
-
The XGT Rapid Charger's built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
-
40V max XGT Lithium-Ion 4.0Ah Battery (BL1840) reaches a full charge in 45 minutes or less
-
Compatible with Makita 40V max XGT Lithium-Ion Batteries
-
Only use genuine Makita batteries and chargers
-
3-year limited warranty on tool, battery and charger.
What’s Included:
-
40V max XGT Brushless Lithium-Ion 15 lbs. Cordless SDS‑MAX AVT Demolition Hammer Kit (4 Ah) - GMH01M1
-
(1) 40V max XGT Brushless 15 lb. SDS-MAX AVT Demolition Hammer, AWS Capable - GMH01Z
-
(1) 40V max XGT 4.0 Ah Battery - BL4040
-
(1) 40V max XGT Rapid Optimum Charger - DC40RA
-
(1) Side Handle Assembly - 135332-7
-
(1) Cloth Towel - 443122-7
-
(1) Grease - 194683-7
-
(1) Tool Case
Power Source
Cordless
Case Type
Case
Impact Energy
9.4 ft-lbs
Bluetooth Compatibility
No
Blows Per Minute(BPM)
2650
Battery Amp Hour
4 Ah
Motor Type
Brushless
Voltage
40V
UL Safety
Yes
Handle Type
D
Noise Rating
89
Power Type
Battery
Battery Warranty
3 Year
CSA Safety
No
Wifi compatibility
No
Batteries Included
1
Battery Type
Li-Ion
Charge Time
45 Minutes
Case Included
Yes
Charger Included
Yes
Chuck Type
Keyless
ETL Safety
No
BPM
2650
Battery System
XGT
Warranty Term
3 Year
Reviews :
Q & A :
Warranty:
Warranty Information
Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
Makita Standard Warranty
The Makita Standard Warranty applies to both new and factory-reconditioned Makita tools. Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers.Each NEW Makita Lithium‐Ion Power Tool, Battery and Charger is warranted to be free of defects from workmanship and materials for the period of THREE YEARS from the date of original purchase
If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at its option, replace without charge).
This Warranty does not apply where:
- Repairs have been made or attempted by others
- Repairs are required because of normal wear and tear
- The tool has been abused, misused or improperly maintained
- Alterations have been made to the tool