Dewalt DXCMLA1683066 1.6 HP 30 Gallon Oil-Lube Portable Air Compressor

Model: dewndxcmla1683066
ratings        (5) Write A Review

Want an email when this item is in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Dewalt DXCMLA1683066 1.6 HP 30 Gallon Oil-Lube Portable Air Compressor Model: dewndxcmla1683066

Product Features & specs :

Dewalt DXCMLA1683066 1.6 HP 30 Gallon Oil-Lube Portable Air Compressor

Details
The DeWALT 1.6 RHP 30 Gallon V-Twin Vertical Air Compressor is designed for the heavy-duty professional user. Featuring a heavy-duty 1.6 RHP cast-iron, V-Twin motor that provides maximum performance and efficiency. The DEWNDXCMLA1683066 provides155 max PSI and can operate a wide range of tools while maintaining longer run times. The compressor is constructed of thermally stable cast iron cylinder body, aluminum head and machined cast-iron valve plate for added durability.
Features:
  • Built with a High Flow Regulator, which supplies more torque for projects like removing old rusted bolts to get more air to the tool
  • DualVage motor is wired for standard 120V outlet, and may also be converted for 240V applications
  • 155 PSI max pressure for optimum tool performance
  • 30 gallon ASME* portable tank with pneumatic tires for maximum portability
  • Fully assembled and equipped with high flow regulator, tank and working pressure gauges, quick connect air outlet and on/off switch for ease of use
What’s Included:
  • 1.6 RHP 30 Gallon V-Twin Vertical Air Compressor - DXCMLA1683066
Power Source
Corded
Lubrication System
Oil-Lube
Tank Capacity
30 gal
Drive System
Belt Drive
Amperage
15
UL Safety
Yes
Operating Pressure (PSI)
155
Tank Style
Portable
CSA Safety
Yes
Pump Type
Reciprocating
Horsepower
1.6
Motor Type
Brushed
Air Consumption at 90 PSI (SCFM)
5.3
Voltage
120V
Fitting Size
1/4 in
Air Consumption at 40 PSI (SCFM)
6.2
Running Horsepower
1.6
Tank Construction
Aluminum
Noise Rating (dBA)
78
Tank Orientation
Vertical
ETL Safety
No
Length
25 in.
Width
24.5 in.
Height
49 in.
Weight
171 lbs.
Warranty Term
2 Year

Reviews :

4.6 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
2
0
0
0
I love it works well in the shop
I bought this 3 months ago and I love it. It works supper in the DIY Garage/ Shop
June 9, 2020
Originally posted at
Very Pleased
I have been very pleased with this compressor. It was a good step up from the red 33 gal oiless compressor I had. This Dewalt is much quieter more powerful and recovers quickly. Very pleased so far.
March 13, 2020
Originally posted at
Works great.
The only reason for the 4 star rating is that I had to get two. The first one leaked around a weld but the second one works perfectly
December 19, 2019
Originally posted at
Really Good Compressor
I purchased to replace an older and smaller capacity compressor. This compressor runs and sounds great. Good DeWalt quality, glad i upgraded. Works well with my tools, looks and feels very well built.
March 23, 2019
Originally posted at
Good compressor with a few tweaks
I needed a replacement compressor as my old one had pinhole leaks in the bottom of the tank. This compressor attracted me due to the brand, tank and motor size and separate motor and compressor units. Down the road I could replace either the motor or compressor if needed unlike direct drive units. For the bad side of this unit I found that it did not like cold weather. In Wisconsin, at this time, the temperature is dropping. This unit is in an unheated garage with the temperature in the 20's. I use it for an adjacent heated woodworking shop. Upon the recommended startup, with the tank drain open, it seemed to start and run ok. However, after closing the drain and using it, the motor seemed to struggle. I found it would trip the motor reset and also the 20 amp circuit breaker. Even with the tank drain open the motor would struggle to get going. Replacing the circuit breaker made no difference. Since the motor can also be 220 volts, I rewired the motor per the decal. I also had to add an additional 220 volt outlet from my welder circuit. So with 50 feet of 10/2 grounded cable, an additional 220 volt outlet and an adapter for the end of the compressor cord it starts and runs great. If this unit is in a higher temperature setting maybe there would be no problem. Also, the drain on the bottom of the tank is a problem. It is too close to the ground and not easily accessible. I added a 90 degree fitting with a hose and gate valve attached to the axle. It makes it much easier to drain. I like the size of the unit and feel it was a good choice.
November 19, 2018
Originally posted at

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 6 answers
What is the wiring for this model Dewalt compressor to convert from 120 vac to 220 vac?
RJM50 on Apr 16, 2019
BEST ANSWER: Your question will be best answered by the manufacturer, who can provide you with the accurate information. The number to reach the technician is 1-800-433-9258.
Is there a Dewalt electric powered air compressor of this size?
Genghis on Oct 11, 2018
BEST ANSWER: Model DXCMLA1683066 is an electric compressor.
can this be used with a sand blaster?
A shopper on Jun 10, 2018
BEST ANSWER: I wouldn't try it. This unit only provides 5.3 CFM at 90 psi. A small sand blaster nozzle usually requires 4 to 8 CFM at 100 psi. Most people use the medium nozzle that requires 10 to 15 CFM.
HOW ABOUT NOISE ?
A shopper on Feb 3, 2017
BEST ANSWER: Approximately 78 dB
What's the over all size?
Steve G on Sep 26, 2016
BEST ANSWER: Product Dimensions 25 x 24.5 x 49 inches
Can it be used with a sand blaster?
Tina S on Jun 10, 2018
what is the Duty Cycle on this compressor?
Dewman on Mar 11, 2018