Dewalt DWFP12569 2-N-1 16-Gauge Nailer and 15-1/2-Gauge Stapler Flooring Tool

Model: dewndwfp12569
        (8) Write A Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Dewalt DWFP12569 2-N-1 16-Gauge Nailer and 15-1/2-Gauge Stapler Flooring Tool Model: dewndwfp12569

Product Features & specs :

Dewalt DWFP12569 2-N-1 16-Gauge Nailer and 15-1/2-Gauge Stapler Flooring Tool

Details
The DeWALT DWFP12569 2-N-1 16-Gauge Nailer and 15-1/2-Gauge Stapler Flooring Tool engages all flooring profiles and protects prefinished flooring. Light weight at only 10.6 lb., the DWFP12569 is better balance for better control. It is ergonomically designed with a longer handle and a comfort rubber grip. Optimized for the most popular solid flooring fasteners, the 2-N-1 flooring tool drives both 16-Gauge flooring cleat nails and 15-1/2-Gauge crown staples.
Features:
  • Lightweight at only 10.6 lbs. for better balance and control
  • Drives 16-Gauge L-shaped flooring cleat nails and 15-1/2-Gauge crown staples - optimized for popular solid flooring fasteners
  • Interchangeable non-marring base plates adjust to all sizes of flooring
  • Ergonomically designed with longer handle and comfortable rubber grip for ease of use
  • Lower CFM requirements for less compressor run time
What’s Included:
  • 2-N-1 16-Gauge Nailer and 15-1/2-Gauge Stapler Flooring Tool - DWFP12569
  • Mallet
  • Oil
  • Wrenches
  • 1/4 in. Air Fitting with Dust Cover
Length
20.35 in.
Width
3.2 in.
Height
22.1 in.
Weight
10.2 lbs.
Air Inlet Size
1/4 in
Average Air Consumption (SCFM)
3.7
Fastener Capacity
100
Fastener Collation
Adhesive
Fastener Length (Max.)
2 in
Fastener Length (Min.)
1-1/2 in
Fastener Type
Flooring Cleat ils
Firing Modes
Mallet
Fitting Type
NPT
Lubrication
Oil-Lube
Magazine Angle
Angles Flooring
Magazine Type
Top Loading
Nail Gauge
16
Operating Pressure (PSI)
70-100
Power Source
Pneumatic
Tip Style
Non-Marring

Reviews :

4.4 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
0
1
0
Would you recommend this product?
Yes (7)
Pros
Powerful (5)
Lightweight (3)
Easy To Use (2)
Ergonomic Design (1)
Best Uses
Large Projects (2)
Frequent Use (1)
Small Projects (1)
Home Repair (1)
Dual fastener nailer is key. Used cleats on first job floor and tool worked seamlessly! Tyler tool shipping was fast and reliable. Great tool.
October 20, 2018
Would you recommend this product?
Yes
Pros
Lightweight
Great Product
Easy to use nails were set perfectly good product.
April 14, 2016
Would you recommend this product?
Yes
Pros
Powerful
Would buy again
Using to put down hardwood in all of the rooms of house. Does a great job of nailing the hardwood making the job faster and easier
January 10, 2016
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Powerful
Lightweight
Love this product, its great.
Great product and even a better company to work with. I'll be purchasing all my tool from CPO and tell all my friends about the great service I recieved from them.
January 5, 2016
Would you recommend this product?
Yes
Pros
Powerful
Would buy again
Putting down hardwood in home on remodeling job
December 26, 2015
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Powerful
DeWalt 2 in 1 flooring nailer
We have used this nailer to assist in flooring projects by a volunteer group. It gets a LOT of heavy use. We just finished installing hardwood flooring in an entire house with almost perfect performance. We had one staple that broke apart in the nailer during use. This was difficult to clear. This is a very powerful nailer that can draw a slightly warped flooring board back into the previous row with no problems.
September 10, 2015
Describe Yourself:
Avid Do-it-Yourselfer

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
What's the smallest thickness of flooring that I can use with this tool? Will it work with 3/8 or 1/2 inch floors?
Dan on Apr 17, 2016
BEST ANSWER: No it will not. It will nail 1/2" 5/8" and 3/4"
How do I adjust the pressure to countersink nails on a DeWalt M III?
Milton J on Jun 18, 2018

Warranty:

Most DEWALT® Tools purchased on or after January 1, 2004 come with a warranty package that includes:

Three-Year Limited Warranty. DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

One-Year Free Service Contract. DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90-Day Money Back Guarantee. If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked.