Dewalt D28715 14 in. Chop Saw with Quick-Change System

Model: dewnd28715
        (34) Write A Review
$214.99
free shipping
This item qualifies for
FREE SHIPPING
free shipping
This item ships directly from manufacturer
alert warning icon

Limit to 1000 per order

OR PAY WITH

CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Dewalt D28715 14 in. Chop Saw with Quick-Change System Model: dewnd28715

Product Features & specs :

Dewalt D28715 14 in. Chop Saw with Quick-Change System

Details
Get it together: a powerful motor, high-speed cutting and excellent overload protection make this saw next to irresistible. Soft start system slowly builds up machine torque, significantly extending gear and motor life. Quik-Change     release enables wrench- and key-free wheel changes. Quik-Fence     blade-angle adjustability takes the guessing and most of the work out of cutting accuracy. Quick-lock vise allows you to prep your materials at record speeds. Extra-wide steel base may be bolted to a bench for added stability. Heavy-duty saw-head pin makes locking down the tool for safe transport a snap. Adjustable spark guard protects workers from sparks and flying debris. Easy-access brushes simplify routine maintenance tasks.
Features:
  • Powerful motor.
  • Soft start system
  • Quik-Change     blade release
  • Quik-Fence     blade-angle adjustability
  • Quick-lock vise
  • Extra-wide steel base
  • Heavy-duty lock-down pin
  • Adjustable spark guard
  • Easy-access brushes
What’s Included:
  • One 14" abrasive wheel, one fence wrench, flange system and base
Length
21 in.
Weight
39 lbs.
Amperage
15
Arbor Size
1 in.
Blade Size
14 in.
Max. Cut Round Pipe
5 in.
Maximum Capacity - Rectangular
4-1/2 in. x 6-1/2-in
Quick Lock Vise
Yes
Shipping Weight
46.7 lbs.
Spindle Lock
Yes

Reviews :

4.7 / 5.0
34 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
27
5
0
1
1
Would you recommend this product?
Yes (25)
No (2)
Pros
Powerful (21)
Easy To Use (20)
Value (2)
Best Uses
Frequent Use (2)
Heavy Duty Requirements (2)
Large Projects (2)
Small Projects (1)
Will not cut straight
PURCHASED THIS SAW FOR A PROJECT IN WHICH I WOULD BE USING 1 INCH SQUARE TUBING AND 2X4 TUBING. TRIED SEVERAL TIME TO CUT THE 1 INCH TUBING AND THE BLADE FLEXIS SO BAD IT WILL NOT CUT STRAIGHT. TRIED ANOTHER BLADE AND STILL CUTS CROOKED. BIGGEST JUNK I OWN.
July 8, 2019
Originally posted at
Good saw for the shop
It's pretty much like any other chop saw. Its powerful and of course shoots tons of sparks. Depending on the material the cut can wonder just a bit, but just take it easy and it shouldn't. It's been a work horse, plain and simple.
This review was collected as part of a promotion
July 2, 2019
Originally posted at
Great Design
I have only used this saw to cut rebar, but it did a fine job. I love the carrying handle and the latch to hold it in the closed position.
July 4, 2018
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Value
I've cut square stock , spikes, round stick and flat stock with ease.
September 20, 2017
Purchased
over 2 years ago
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Great product at a great price
Great product at a great price
June 25, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Great product at a great price
Great product at a good price
June 5, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Awesome!
just love it!
May 9, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Serves its intended purpose at an affordable price
Weekend DIY with CPO I can afford more tools
April 17, 2016
Great for the home hobbyist metal worker!
I bought the D28715, because I was needing a chop saw of my own for my own garage/hobby/small project metal work needs. I was getting tired of needing one and having to borrow my dad's all the time. I like the lighter weight of this saw because I have to lug it around my garage and don't have a dedicated cutting table setup for it. That being said, I wish the base unit was made of a little bit thicker gauge steel. The one I got from Lowes, looked like it was dropped and one of the feet was bent. Also, I'm not very please with the design of the work clamp, its place really far back and only allows you to use a fairly small amount the cutting disc before it will stop making full cuts through the work. A 14" cutting disc wears to 11.5", which affords the use of only 1.25" of the cutting radius, then you have to change the disc. This is far less use then I have seen out of other brand chop saws. Which brings me to the next positive point about this chop saw, the Quick-Change disc change system. It's nice to not have to look for a wrench to swap discs. All in all this is a great saw for the catagory of home hobbyist metal worker, but due to the short comings I have experienced with it above, I can only give it 4 stars. One side note though, my D28715 is a "Type 2" revision unit that I purchased around 3-4 years ago if I remember correctly, so I don't know if these issues have been address. But just be aware this could still be a factor in the later "Type" revisions of the D28715 chop saw.
April 10, 2016
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Looks new to me!
This is a nice step up from the models with torsion springs. It is very smooth and accurate. I upgraded to a thicker cutting wheel so I could do miter cuts since the thin wheel wouldn't stop sliding off the pipe. The quick change is a nice feature as well. I was also glad that it has a blade lock and handle to carry it convieniently.
March 3, 2016

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 8 answers
Does it cut wood?
A shopper on Aug 4, 2018
BEST ANSWER: This saw is designed to be used with an abrasive type blade which is meant for cutting metal. This is the type of blade that it comes with. A proper blade has a 14 in diameter wheel with a one inch arbor. If you installed a blade meant for wood, you probably could cut wood with it no problem. However, this is not a miter saw for wood and is not designed as such. It is designed as an abrasives chop for metal, masonry, etc.
is there a stand for this chop saw ?
kent c on Dec 22, 2016
BEST ANSWER: There is not but I just put it on top of my work table & it works great
What is the rpm inch chop saw
None on Mar 13, 2016
BEST ANSWER: This runs at 4000 rpm.
Would this cut 1" logging cable?
Phillip on Nov 30, 2015
BEST ANSWER: Yes, the dewnd28715 will cut 1" cable
what's the maximum solid thickness can you cut with this? What are the RPM's and can you use a cutting blade?
Justin on Apr 16, 2015
BEST ANSWER: Max. Cut for Round Pipe is 5 in. Max Cut for rectangular is 4-1/2 in. x 6-1/2-in. The RPMs are 4,000rpm and we recommend that that you stay within the specifications by using an abrasive blade.
What is the height of the cutting bed from the bench or surface it would sit on?
Stephen on Dec 10, 2014
BEST ANSWER: It is 2-1/4".

Warranty:

Most DEWALT® Tools purchased on or after January 1, 2004 come with a warranty package that includes:

Three-Year Limited Warranty. DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

One-Year Free Service Contract. DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90-Day Money Back Guarantee. If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked.