Dewalt DWE43114 4-1/2 in. - 5 in. High Performance Paddle Switch Grinder

Model: dewndwe43114
        (9) Write A Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Dewalt DWE43114 4-1/2 in. - 5 in. High Performance Paddle Switch Grinder Model: dewndwe43114

Product Features & specs :

Dewalt DWE43114 4-1/2 in. - 5 in. High Performance Paddle Switch Grinder

Details
The DWE43114 4-1/2 in. (115mm) / 5 in. (125mm) High Performance Cut-Off/Grinder with E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection System technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off Advanced Overload Protection.
Features:
  • E-Clutch Activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
  • 13 Amp Motor
  • Power Loss Reset prevents accidental restarts following a power disruption when the tool is left in the "on" position.
  • 11,000 RPM Rating
  • Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter through the air intake vents.
What’s Included:
  • Grinder
  • Side Handle
  • Inner and Outer Flange
  • 5 in. Type 27 Guard
Length
16.88 in.
Width
6.13 in.
Height
5.13 in.
Weight
5.5 lbs.
Amperage
13
Arbor Size
5/8 in
Bluetooth Compatibility
No
CSA Safety
Yes
Case Included
No
Cord Length
6 in
ETL Safety
No
Horsepower
2.3
Motor Type
Brushed
No-Load Speed (RPM)
11000
Power Source
Corded
Spindle Thread
5/8 in - 11
Switch Settings
No Lock
Switch Type
Paddle
UL Safety
No
Variable Speed
No
Voltage
120V
Wheel Diameter
5 in
Wifi compatibility
No

Reviews :

4.9 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
1
0
0
0
Can't wear out my old one!
I have the old model which I have used for about 15 years. I've changed the grease, the brushes and the power cord and it keeps on running. I've had to make a new wrench when I lost the original. If this is an example of DeWalt power tools then I won't buy anything else. I sort of wish my old one would die so I can buy this new one but in the meanwhile I'll just keep using the old one and marveling at it's performance. I use this grinder for my knifemaking and blacksmithing hobbies and am amazed at how straight a cut I can make. (36" on both sides of a 5" square tubing to make a quench tank with less than 1/16" off of the line over the entire 36". I've done this twice and couldn't believe it either time! What a great tool!
This review was collected as part of a promotion
November 9, 2019
Originally posted at
Easy to use
This was a gift to me, operates great. Ergonomic features, easy on/off switch. Locking feature highly recommend.
This review was collected as part of a promotion
November 8, 2019
Originally posted at
Great product
Works great can’t ask for better with the right blade cuts like butter
This review was collected as part of a promotion
July 1, 2019
Originally posted at
Excellent product
Bought two off these grinders a few weeks ago for a big job and I am thrilled on the results. They are fantastic tools and work great.
This review was collected as part of a promotion
June 26, 2019
Originally posted at
Excellent product
Bought two off these grinders a few weeks ago for a big job and I am thrilled on the results. They are fantastic tools and work great.
This review was collected as part of a promotion
June 26, 2019
Originally posted at
4" grinder
I'm a welder by trade mostly weld gas pipe in commercial buildings and this grinder is by far the best I have found for grinding bevels on pipe to cleaning the welds it can't be beat
This review was collected as part of a promotion
November 18, 2018
Originally posted at
I am ruthless on these grinders!
This is my third or fourth 4 1/2" dewalt grinder, I also have the 7" and the bench grinder. The 4 1/2" goes everywhere, carpentry, masonry, Metal work, you name it it gets used.
This review was collected as part of a promotion
November 13, 2018
Originally posted at
Unbeatable!
I have had this grinder since it came out, it has been dropped, rained on, and abused and it just keeps going.
This review was collected as part of a promotion
November 12, 2018
Originally posted at
Workhorse
This grinder is a workhorse—rugged, tough and powerful. Has the safety features I care about like a clutch so there's less kickback. It always gets the job done.
This review was collected as part of a promotion
November 12, 2018
Originally posted at

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!